High tensile strength: The belts are suitable for large span, long distance transportation of materials.
Small elongation in use: The belts need only a very short take-up stroke distance.
Small diameter of drive pulley: The belt body has a layer of longitudinally arranged steel cords as its skeleton, and thus is resistant to flex fatigue.Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.
High adhesion between rubber and stee cord: The steel cords are coated with zinc on their surface, and also the rubber used has the property of good adhesion with steel cords. Therefore, the rubber istightly adhered to the steel cords and is resistant to shock and difficult to drop, so the rubber belts are long in life.
Even tensionof steel cords: Out of our advanced techniques in manufacturing, the steel cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run away.
Good troughability: As the belt body has no transverse skeleton, it is easy to form a dep rough, so the belts can load more materials and prevent the materials from escaping.
Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.
